250/80g Black Color Film Faced Plywood

Product Name	Phenolic Film Faced Shuttering Plywood
Grade	Good 2 Sides
Face & Back Film	250/80g Chinese Black Film (Made in China Film)
Core Veneer	Poplar Veneer / Combi (Poplar + MLH)
Glue Type	Type I WBP (Water Boiling Proof) Type II MR (Moisture Resistance)
Thickness	12mm(Poplar7ply + 2 layers film) 15mm(Poplar 9ply + 2 layers film) 18mm(Poplar 11ply + 2 layers film)
Size(mm)	610 x 2440(2’x 8’) / 1220 x 2440(4’x 8’)

Characteristics of Film Surface

Items	Face	Back
Color Variation	Slightly	Slightly
Wrinkles & Corrugation	Not allowed.	Not allowed
De-lamination	Not allowed	Not allowed
Burn Marks	Not allowed	Not allowed
Vapor Spots	Not allowed	Max. diam.5mm, Not clustered
Glossy Spots	Slightly	Not seriously
Giraffe Spots	Slightly	Not seriously
Fine Checks	Very Slightly	Partially Allowed, Not Seriously
Patches	Not allowed	Max. 1 x 100mm, Color matched
Press Marks	Not allowed	Slightly Max. 1
Wood Strips	Not allowed	Slightly Max. 1

Core Veneer of Base Panel

Uneven Core Thickness	Not allowed
Laps	Not allowed
Voids	Max. 3.0mm, one in single layer.
Shims	Yes, well repaired
Sealed Edge	WBP in Blue color, MR in Dark Brown color

Physical Test

Moisture Contents	Less than 12%
Thickness Tolerance	±0.5mm
Allowance in Width & Length	±2.0mm
Diagonal Allowance	Max. 3.0mm
Adhesion	Type I : 4 hrs in boiling & 20 hrs drying at 60°C, 4 hrs in boiling again Type II : 2 hrs boiling & 3 hrs drying at 60°C, Both Min. 0.7 N/mm2
Bending Strength (0°)	Min. 23.5 N/mm2
Bending Strength (90°)	Min. 19.5 N/mm2
Compressive Strength (0°)	Min. 12.0 N/mm2
Compressive Strength (90°)	Min. 12.0 N/mm2
Warp	0.1% (1.22mm against 1220mm width, 2.44mm against 2440mm length)