CDX Pine throughout
Plywood

CDX Pine throughout Plywood

Product Name Natural Pine veneered Plywood
Cut Rotary-Cut
Grade C / D Grade by APA Grade
Face & Back Veneer Pine veneer
Core Veneer Pine Veneer
Glue Type Type I WBP (Water Boiling Proof: Phenolic / Melamine)
Type II MR E1, E2 (Moisture Resistance: Interior, Urea Formaldehyde)
Thickness 9mm / 12mm / 15mm / 17mm / 18mm / 19mm / 25mm
Size(mm) 1220 x 2440(4’ x 8’)
C Plugged Grade
CDX Pine throughout Plywood
C Grade
CDX Pine throughout Plywood
C Grade
CDX Pine throughout Plywood
D Grade
CDX Pine throughout Plywood
Veneer Grades (APA The Engineered Wood Association)
A Smooth, paintable. Not more than 18 neatly made repairs, boat, sled, or router type, and parallel to grain, permitted. Wood or synthetic repairs permitted. May be used for natural finish in less demanding applications.
B Solid surface. Shims, sled or router repairs, and tight knots to 1 inch across grain permitted. Wood or synthetic repairs permitted. Some minor splits permitted.
C plugged Improved C veneer with splits limited to 1/8 inch width and knotholes or other open defects limited to 1/4 x 1/2 inch. Admits some broken grain. Wood or synthetic repairs permitted.
C Tight knots to 1-1/2 inch. Knotholes to 1 inch across grain and some to 1-1/2 inch if total width of knots and knotholes is within specified limits. Synthetic or wood repairs. Discoloration and sanding defects that do not impair strength permitted. Limited splits allowed. Stitching permitted.
D Knots and knotholes to 2-1/2 inch width across grain and 1/2 inch larger within specified limits. Limited splits allowed. Stitching permitted. Limited to Interior, Exposure 1 and Exposure 2 panels.

※Span Ratings
Some APA trademarked panels – Rated Sheathing, Rated Sturd-I-Floor and Rated Siding – carry numbers in their trademarks called Span Ratings. These denote the maximum recommended center-to center spacing in inches of supports over which the panel should be placed in construction applications.